电池充电器,智能充电器,锂电池充电器,蓄电池充电器,充电器厂家

G100-24F 磷酸铁锂电池智能充电器,适用于8节 25.6V磷酸铁锂电池

  • 规格参数
  • 输入: 100~240V
  • 输出: 28.8V 2.8A
  • 充电过程: 预充、恒流、恒压和关闭(四段式充电)
  • 充电指示: 特有4个LED灯显示电量,25%-100%
  • 输出保护: 有过流、过压、短路、反接和温度多重保护
  • 安全认证: CE UL PSE SAA FCC CCC
  • 尺寸重量: 170 x 70 x 41mm/400g
  • 适用电池范围: 25.6V (8节) 2~15Ah 磷酸铁锂电池
G100-24F 磷酸铁锂电池智能充电器,适用于8节 25.6V磷酸铁锂电池
G100-24F family products are main member of Green Digital Power-tech Co., Ltd. It represents today's new technology for 25.6V 8 Cell LiFePo4 battery pack charging. G100-24F programmed 4 auto stages (Pre-CC-CV-Cutoff) charging process, It is designed for 3~25Ah LiFePo4 battery pack. Stage "Pre" is a pre-charge function for deep discharged battery pack, this is helpful for battery's cycle life. The pre-charge current is less than 1/3 C.C value. When the battery recovered by pre-charge small current, stage "CC" will give constant current charging, the charge current up to 90W. Then, "CV" stage is followed, the output voltage is limited on C.V value, until the charge current declined to 1/8 C.C. At this stage, the battery is charged completely and the charger will cut off output automatic.
Further, G100-24F can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G100-24F will inter protection mode when the battery polarity reversed our the output connectors shorted.
 
General Specification for G100-24F

Input Voltage:  AC 100~240V 50/60Hz

100-240VAC, 50-60Hz

Input Current:  Max.1.6A

Max。1。6A

Output

G100-12F

G100-12L

G100-24F

G100-24L

G100-36L

G100-36F

G100-48F

G100-48L

C.V

14。4V

16。8V

28.8V

29。4V

42.0V

43。2V

54。0V

54.6V

C.C

5.0A

4.5A

2.8A

2.8A

2.0A

2。0A

1.7A

1.7A

Operating

-20~40

Cooling

No fan designing, natural convection. Do not cover the charger.

Charge process

Auto 4 stages: Pre-CC-CV-Cutoff

Cut-off when charge finished.

Battery

25.6V 8 Cell LiFePo4 Battery-pack.

Size

170 x 70 x 51mm

Enclosure

ABS+PC Plastic housing, inlet type C8 or C14

Weight

400g

 
 
How to use:
1.Connect the AC cord to the socket, The "power" lamp will light on solid.
2.Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, "Warning" lamp will flashing, please check the setup.
3.Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
 
An example shows the duration of 80% state charged for an empty battery.

Battery capacity

G100-24L

3。2Ah

1.5 hours

7.0Ah

3 hours

12Ah

5 hours

25Ah

10 hours

返回
顶部
博发彩票登陆 吉利彩票计划 大象彩票登入 桔子彩票登陆 状元彩票计划 博发彩票开户 桔子彩票平台 桔子彩票网址 博发彩票APP下载 吉利彩票投注